The 2002 Antares refreshment vending machine centers had a slight change from previous years. This was simply adding an additional support bracket for the side mount dollar bill changer. It attached to the top lid of the existing "L" bracket and went across the top of the machine before folding down the left side wall a few inches. Just like the main "L" bracket, it only attached to the soda vending machine via a double sided adhesive tape.
It probably adds a little more resistance if someone is trying to remove the changer from the combo, but I personally do not think it made much difference. As long as the adhesive tape is applied correctly the first time on the main bracket, it is extremely strong and is further backed up by the metal cable that connects the changer to the bottom base feet.
For more common sense in vending, visit www.USEDvending.com & www.4MEGA-Vending.com
2 comments:
I deleted your comment so that your email would not show in the message & get spammed. Here it is with a reply:
** I'm trying to locate a manual or something on how to lower the temperature in my Antares Combo...looks like the 2005 design. My beverages aren't cold enough. Any help is appreciated. Please contact me at.... Thanks!**
Look on the back down by the opening for the thermostat. It has
a dial that you can turn with a screwdriver to increase / decrease the temperature.
If that doesn't work, check your door seal for air leaks. Then have someone check the freon in the refrigeration.
for more common sense in vending,visit www.USEDvending.com and www.4MEGA-Vending.com
Post a Comment